Gas Network
Design Software
Combining Design and Calculations in a Fully Integrated Environment
4M introduces the brand new FINE MEP 19 version with amazing new features and capabilities. 4M FINEGAS can generate the complete case study output of any Gas project, directly through the drawings in DWG. The program output, which is in fact the result of the intelligent, synergistic co-operation between its two Components, "CAD" and "Calculations", includes the respective calculation sheets, technical reports, bill of materials, plus the full set of the final drawings ready to be submitted.
"So much of MEP engineering is driven by calculations, and the use of a BIM suite like FINE MEP that automates much of the grunt work gives engineers more time and energy to focus on the higher-level aspects of the design. These engineers now have a simple and cost-effective way to transition from CAD to BIM"
- AECbytes.com
Read the full Review >
Unrivalled Compatibility with AutoCAD
FINEGAS produces files directly in DWG and includes features to convert the sophisticated BIM objects that can't be seen in CAD software into simple vectors that can be further edited in AutoCAD®.
Easy Transition for CAD Users to BIM and Gas Network Installation Software
In FINEGAS you can create your BIM project in 2D or 3D using very simple 2D commands very familiar to any CAD user like polylines, trim, extend, entity snaps and copy.
Includes full CAD Software
FINEGAS includes all the features of 4MCAD, our alternative to AutoCAD®. You get 2 software packages in one, you can keep using CAD to edit some DWG drawings.
FINEGAS Features and Highlights
EASY TRANSITION
The Easiest Switch for CAD Users to BIM and Gas Network Installation Software
In FINEGAS you can create your BIM project in 2D or 3D using very simple 2D commands very familiar to any CAD user like polylines, trim, extend, entity snaps, copy... FineGAS combines a state-of-the-art BIM technology and an AutoCAD-like look and feel to help you to draw your project and networks faster and easier.
Draw in 2D and get all the 3D Automatically
FineGAS includes all the tools you need to draw the building in 2D or 3D but if you don't need it you can simply insert a 2D DWG drawing of the floor plan to use it as a background and focus on the plumbing installation. You can also use our CAD features to quickly draw some walls.
Drawing the building in 3D with BIM objects is not required to proceed to the piping calculations but you can also do it in a few clicks. Calculation and design are independent modules : if you have a simple project you may like to use only the calculation module to enter just the data in a table and proceed to the calculations.
If you feel like drawing the building in 3D you simply need to focus on floor plans using the intelligent and parametric objects of the AutoBLD menu. You can define walls, openings, slabs, stairs and more with just a few clicks and FineGAS will build the 3D for you. A simple double-click on any object will display its properties for modification. You have all the required tools to create or modify the BIM model without using any other external software.
Alternatively you can also open a project created with any other 4M BIM Software and will not have to draw the building. You may for example open a project created with IDEA Architecture.
Maximum Compatibility with AutoCAD
Unlike other BIM Plumbing Software, FineGAS is producing files directly in DWG and includes features to convert the sophisticated BIM objects that can't be seen in CAD software into simple vectors that can be further edited in AutoCAD®. Sharing 2D or 3D files with other professionals is therefore much easier.
Includes a Full CAD Software
This Plumbing Software includes all the features of 4MCAD , our alternative to AutoCAD®. You get 2 software in one, your can keep using CAD to edit some DWG drawings while using our BIM technology to increase your productivity when working on most of your projects. At least you can feel safe and migrate to BIM at your own pace.
NETWORKS
Intelligent Plumbing Design
Unlike in other BIM software, FineGAS' modern BIM technology does not come at the expense of speed, it is just the opposite : you just need to draw a few single lines and the software will do the rest.
Extensive Libraries of Elements and Fittings
FineGAS includes extensive libraries of hydraulic receptors and fittings for the bathroom, kitchen and all the different scenario you can imagine for the gas network of your building. These libraries can also be extended by the user who can change the symbols and add more components.
Network Design (Autorouting)
Pipes can be drawn with simple commands (just polylines) but you can also take advantage of some expert routing commands like "Pipes Parallel to Wall" or "automatically connected to the receptors" to speed up the process.
Update Drawing from Calculation
After performing the calculations you will update the drawing from the calculation module and insert labels in the floor plans showing the results and details you would like to display about each component. Pipes diameter will be calculated and pipes will be resized in the design.
FineGAS will also help you to create automatically the legend of your symbols and of course to generate all the technical drawings like the vertical diagrams of your installation.
CALCULATIONS
Calculate your Gas Installation
FineGAS' Calculation module is closely interacting with the installation drawing. Calculations are performed following the widely accepted EN1775 (European Norm) and the DVGW-TRGI (German general framework).
Calculate from the Drawing
The calculations Component is automatically updated from the installation drawings through the AutoNET group of commands. The installation networks are recognized and transferred into the calculation sheets. Calculations rely on a rich Methodological background, based on International and European standards. You may also modify these data if you want for example to anticipate a future extension of the network.
All the Results in a few clicks
Besides the piping calculations, FineGAS calculates all the necessary equipment, pressure drops, flow rates etc, as well as the bill of the materials, technical descriptions/specifications and other results.
An alternative way to get the calculations is by using the intelligent FineGAS wizard. The user describes the Gas network installations in a visual way, through the existing templates (slides) and then the wizard generates the vertical diagram plus the results of the calculations.
2D/3D OUTPUTS
Get Automatically all the Technical Drawings
After proceeding to the design of the network and calculations our MEP Software will let you generate all the technical drawings and reports you need.
Vertical Diagrams/Charts
Our MEP Software will generate for you the vertical diagrams of your Gas network installations in DWG drawings you can further modify and/or share.
Technical Reports & Bill of Materials
FineGAS will generate a document with the calculation results and the bill of materials describing the quantities of each of the elements required to build the installation. The template of this document can be customized and you can chose which results you want to display.
Project Drawings
The floor plans of the Building will be updated with the results of calculation with labels to define the details of each component. As a result you will be able to generate floor plans in DWG showing all the receptors and networks you have defined.
BIM
Feel the Power of BIM Software for Plumbing Installations
4M is among the companies with the longest experience of BIM with a complete suite of BIM Software for Architecture & Engineering first released in 1993. The 4M BIM Software are renown by experts to be the BIM software offering the easiest migration for AutoCAD users as they are the only ones to use DWG as their native file format and an AutoCAD-like look-and-feel.
BIM Design and Collaboration in FineGAS
The close interaction of our Calculation module with the BIM model will help you to make all the calculations of your plumbing installation directly from the model. FineGAS will simply read the project drawing to understand the project, the properties of the network, proceed to calculations and finally update the drawings with the results.
Last but not least you will be able to collaborate with other BIM software and share with other architects and engineers the discipline-specific contents you added to the common BIM project.
The BIM information can also be extracted to create a Bill of Materials showing the quantities and details of the various elements you created in the water supply & sewage systems. You can calculate the cost and get a detailed description of the elements and fittings you need.
